After lightning strike, CBP’s air branch in Texas needs security systems repaired and replaced

Fiber optic fence security systems use light rather than electricity to detect intruders. During operation, light pulses are transmitted through fiber optic cable, which is typically installed on existing perimeter fencing. These light pulses are continually monitored for any change in light pattern or optical power, as may occur when the fiber is physically disturbed during an intrusion attempt. High security fiber-optic systems monitor the small changes in the light signal and detect any movement, vibration or pressure that occurs along a protection zone.


When compared to other types of security systems, Fiber Optic fence systems offer many advantages over other sensing technologies:


• Immunity to electromagnetic interference (EMI) - Compared to electronic, microwave, and electric field sensors, fiber-optic sensors / not subject to interference from EMI.
• Safe for all environments - Fiber optic sensing cable does not carry or conduct electricity; it is safe for use around fuels, gases and combustible materials.
• Exceptional range - Fiber optic monitoring systems operate over far greater range than electronic sensing systems.
• Low incident of nuisance alarms - Fiber optic fence systems are not subject to interference due to animals, weather, changing light conditions, EMI, and so forth.
• Cost effective - Fiber optic sensing cable is easily incorporated into all types of existing fences and walls. The cable can also be mounted on posts as a stand-alone system. Fiber optic sensors typically do not require electrical power in the field.

Customs and Border Patrol (CBP) air branch in Texas needs security systems repaired and replaced - Read the full article on Fiber Superiority here:

>>> Fiber Superiority

Fiber SenSys News Center

New Buried Line Sensor

New Buried Line Sensor

Press Releases / FSI News 27 February 2020
Fiber SenSys, Inc. releases the industry’s first practical Buried Intrusion Sensor. Point locating buried line sensor for physical perimeter intrusion detection HILLSBORO, OR, February 5, 2020 – Fiber SenSys, Inc. (FSI) recently announced the release of the Terrain Defender TD100™, the definitive intrusion sensor for buried applications. This Radio Frequency (RF) leaky coaxial sensor implements a patented Fiber SenSys technique called End-to-End Correlation (E2EC™). Processors on both ends of a cable pair transmit and receive a high-frequency signal forming a detection field. Data from both ends are then synchronized and processed. E2EC provides several benefits, including: Better signal processing resulting…
Full Article...

Building for our future - Catching up December 2019 - February 2020

09 February 2020
Through the holidays and into the new year progress continues Wall Raising in December: January Aerial with roof: February Interior work begins: February Roof Sealing:

Building for our future - November 2019

10 December 2019
Progress continues... even in the Oregon rain!

Building for our future - October 2019 Progress

31 October 2019
Progress continues at the new world headquarters site of Fiber SenSys, Inc.

Fiber SenSys, Inc. Breaks Ground on New Facility

19 July 2019
HILLSBORO, Oregon, July 17, 2019 --- Fiber SenSys, Inc., the leading manufacturer of physical security in the data and perimeter marketplace, is pleased to announce that they have broken ground…