Battery backup is required at many facilities to maintain protection of critical assets when power is lost. This document addresses the common questions and concerns regarding battery backup configuration.
This brief Tech Tip addresses common questions and concerns on fusion splicing single-mode to multimode fiber.
The SecurLAN™ SL508 Alarm Processor Unit (APU) was developed specifically for use in alarmed carrier PDS systems. This APU has been evaluated and tested by the Space and Naval Warfare Systems Command (SPAWAR) and also by the U.S. Air Force and the U.S. ARMY.
Each facility or campus is unique, with a unique set of characteristics and environmental conditions, FSI has created a tuning and calibration software tool for manual adjustment of the APUs. For optimal performance of the system, each FSI Alarm Processor Unit is tuned and calibrated by a trained and certified systems integrator to match the specific environment that they are protecting.
Download the following Tech Tip to understand how to tune the FSI APUs for PDS applications.
Outdoor applications of fiber-optic perimeter intrusion detection systems expose the sensor cable to a wide variety of stimuli ranging from high winds, rain, and in some cases even the signals associated with trains, trucks and other vehicles.
You can download the side-by-side comparison of our alarm processor units here:
Fiber Defender 300 Series Outdoor Enclosure Spec Sheet
Rev B. 862.44 KB
Fiber Defender Overview - Spanish
Rev C. 717.29 KB
Fiber Defender® Family Brochure
Rev H. 1.12 MB
Fiber Defender® Overview & Comparison Chart
Rev I. 555.01 KB
A well rounded and regularly followed PM program will ensure that your Fiber SenSys system will continue to perform as designed to high industry standards for many years.